IPS Ceramic Etching Gel is an etching agent designed to create an adhesive retention surface for ceramic materials deposited with composite materials. It increases the bonding strength of the composite material (cement) with the ceramic surface.

ATTENTION ! The material must not be used directly in the mouth.

Packaging:

• Gel 5 ml

Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max. Size small 100g.

Packaging:

1 piece.

Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max.

• Large size 200g.

Packaging:

• 1 piece.

IPS e.max Ceram Transpa Incisal, incisal mass.

Packaging:

• 20g.

IPS e.max Ceram Glaze Paste.

Glaze in the form of a paste.

Packaging:

• 3g.

IPS e.max Ceram ZirLiner.

Used to characterize white zirconium oxide frameworks. Helps match the base color to the base colors in IPS e.max Press and IPS e.max CAD

Packaging:

• 5g.

IPS e.max Ceram nano-fluoroapatite ceramic for veneering all-ceramic structures. Designed for firing all IPS e.max components - both made of glass ceramics and zirconium oxide. Thanks to this combination, a clear pattern of applying individual layers, and a combination of aesthetics and durability, the technician can offer the doctor and his patients maximum radiance of individual naturalness.

Characteristics:

It comes in 16 AD colors and 4 Bleach colors.

Packaging:

• 1pc/20g.

IPS e.max Ceram Margin, mass for modeling the cervical area and for making ceramic steps on the IPS e.max ZirCAD framework.

Due to the difference in firing temperature with respect to dentine and incisal materials, Margin materials exhibit excellent layering stability.

Packaging:

• 20g.

IPS e.max Press. Disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain an absolutely homogeneous material, which is available in the form of pellets with various opacity.

Indications:

• Crowns in the anterior and lateral sections.
• Three-unit bridges in the anterior region.
• Three-point bridges in the posterior section, to the second premolar as the last abutment tooth.
• Pressing on single galvanic crowns.
• Primary telescopic crowns.

Characteristics:

• Mechanical strength 400 MPa.
• HO pellets with high opacity are available in three colors HO1, HO2, HO3

Packaging:

• 5pcs/1 pack

IPSe.max Ring System 200g is used for embedding wax-modelled structures in investment mass.

Characteristics:

• The base has been widened so that the silicone rings fit it perfectly.
• Thanks to their larger sizes, they are easy to distinguish from the bases used in the Empress system.

Packaging:

• 3 pcs.

IPS e.max Alox Plunger. The plungers are used to force the molten material into the mold in the investment compound ring.

Characteristics:

• They are shorter and have a larger diameter than the Empress pistons.
• The plungers are rounded on both ends, so they can be used for pressing with both ends.

Packaging:

• 2 pcs.

IPS e.max Alox Plunger Separator. This material prevents the molten material from sticking to the plungers during the pressing process in the furnace. The cold plunger is inserted into the opening of the container and rotated. The powder remains on the surface of the plunger and forms an insulating layer. A very small amount of separator is sufficient. Then the cold, separator-coated plunger is inserted into the hole in the annealed investment ring.

Packaging:

• 20g.

IPS e.max Ceram tile liquid.

Packaging:

• 15 ml.

IPS e.max Ceram Transpa.

Characteristics:

• They are used for accurate reproduction of transparent areas with all details, mainly in the incisal area.

Packaging:

• 20g.

IPS e.max Press MO are disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain absolutely hemogenic material, which is available in the form of lozenges with various degrees of opaqueness.

Indications:

• Crowns in the anterior and lateral sections.
• Three-unit bridges in the anterior region.
• Three-point bridges in the posterior section, to the second transmolar tooth as the last abutment tooth.
• Pressing on single galvanic crowns.
• Primary telescopic crowns.

Characteristics:

• Bending strength 400 MPa.
• MO lozenges with medium opacity are available in 5 colors.
• MO 0 for shades BL 1, BL 2, BL 3, BL 4 for whitened teeth.
• MO 1 for colors A- D A1, A2, B1, B2, C1.
• MO 2 for colors A- D A3,A3,5.
• MO3 for colors A- D B3,B4.
• MO4 for colors A- D A4,C2,C3,C4,D2,D3,D4.
• L-large lozenges.

Packaging:

• 3pcs/pack

IPS e.max Ceram Glaze FLUO paste.

Characteristics:

• It is used in areas of the restoration that have not been veneered with IPS e.mac Ceram.
• Additionally, it is applied to frameworks that show no or very little fluorescence.

Packaging:

• 3g.

IPS e.max Press HO are disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain absolutely hemogenic material, which is available in the form of lozenges with various degrees of opaqueness.

Indications:

• Crowns in the anterior and lateral sections.
• Three-unit bridges in the anterior region.
• Three-point bridges in the posterior section, to the second premolar as the last abutment tooth.
• Pressing onto single galvanic crowns.
• Primary telescopic crowns.

Characteristics:

• Bending strength 400 MPa.
• HO lozenges with high opacity are available in one color.
• Large L lozenges.

Packaging:

• 3pcs/pack

IPS e.max Ceram Essence, materials for characterizing and staining ceramic restorations, can be fired together with the glaze or separately.

Packaging:

• 5g.

IPS e.max Investment Ring System 100g is used to embed structures modeled in wax in the investment mass.

Characteristics:

• The base has been widened so that the silicone rings fit it perfectly.
• Thanks to their larger sizes, they are easy to distinguish from the bases used in the Empress system.

Packaging:

• 3pcs

IPS e.max Ceram Shade. Compounds for the final color modification of prosthetic restorations made of IPS e.max, as well as for the "wash" layer

Packaging:

• 3g.

IPS e.max Press Inwex Liquid is used to dissolve the surface reaction layer formed on embossed elements during the stamping process.

Packaging:

• 1000ml.

IPS e.max Press MO - Medium Opacity

The lozenges are available in 5 color groups {MO 0 - MO4}. Due to the degree of opacity, they are ideal for the fabrication of living, slightly discolored stumps. The individual anatomical shape of the restoration is then carried out using IPS e.max Ceram. Finally, apply the stains and fire the IPS e.max Ceram Glaze.

Package:

• IPS e.max Press Ingots HO - 1x5 pcs.
• IPS e.max Press Ingots MO 0, MO 1, MO 2, MO 3, MO 4, - 1 x 5 pcs.
• IPS e.max Press Ingots L HO 1x 3 pcs.
• IPS e.max Press Ingots L MO 0, MO 1, MO 2, MO 3, MO 4,
• IPS e.max Investment Ring System 100 g - 1 pc
• IPS e.max Investment Ring System 200g - 1 pc
• IPS Silicone Ring 100g - 1 pc
• IPS Silicone Ring 200g - 1 pc
• IPS e.max Alox Plunger - 2 pcs
• IPS e.max Alox Plunger Separator - 20g
• IPS Connector - 1 pc
• IPS e.max Press HO / MO Material Shade Guide - 1 pc

IPS e.max Press MO (Medium Opacity) are disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain an absolutely homogeneous material, which is available in the form of pellets with various degrees of opaqueness.

Indications:

• Crowns in the anterior and lateral sections.
• Three-unit bridges in the anterior region.
• Three-point bridges in the posterior section, to the second premolar as the last abutment tooth.
• Pressing on single galvanic crowns.
• Primary telescopic crowns.

Characteristics:

• Bending strength 400 MPa.
• MO lozenges with medium opacity, available in 5 colors.
• MO 0 for Bleach colors BL1, BL2, BL3, BL4.
• MO1 for colors A- D A1,A2,B1,B2,C1.
• MO2 for colors A- D A3,A3,5.
• MO3 for colors A- D B3, B4.
• Mo4 for colors A- D A4,C2,C3,C4,D2,D3,D4.

Packaging:

• 5 pcs.

Liquid for IPS e.max Ceram Zirliner.

Packaging:

• 60 ml.

IPS e.max Ceram, margin liquid.

Packaging:

• 60ml.

IPS e.max Press LT low Translucency

LT lozenges are available in 16 AD shades and 4 Bleach BL shades for bleached teeth. Due to their low translucency, they are ideal for making larger restorations, e.g. posterior crowns. Restorations made of LT lozenges are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. LT tablets are suitable for work with the cut bac technique, they can also be used in the painting technique. For the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and characterization should be done with IPS e.max Ceram Essence and Shades.

Packaging:

• 5pcs/pack

IPS e.max Ceram Deep Dentin.

Deep Dentin materials, characterized by fluorescence close to natural, increased opaqueness and color saturation, enable the achievement of natural tooth color even when the amount of space is limited, and thus allow for increased color intensity, especially in the cervical area, which results in a more accurate color match of the gingival span. .

Packaging:

• 20g.

IPS e.max Ceram Impulse Opal Effect.

Opal Effect materials are available in 6 different colors. Starting with Opal Effect - 1 with naturally increased opalescence and at the same time high translucency - the brightness between Opal Effect 2 and 4 gradually increases. Opal Effect 5 is characterized by a typical iridescent color. The Opal Effect Violet material is used to reduce the brightness in the incisal area.

Packaging:

• 20 g.

IPS e.max Ceram Impulse Occlusal Dentin.

Occlusal Dentin materials are available in two colors (Brown and Orange).

They are used to obtain the basic color of the chewing surfaces and to intensify the saturation.

Packaging:

• 20g

IPS e.max Ceram Impulse Mamelon.

Mamelon materials are available in three colors (Light, Salmon, Yellow-Orange).

They have high opacity and excellent covering properties, even when applied in thin layers.

Depending on the method of work, these materials are placed in thin lines on the surface of the reduced dentine, thus achieving an individualized appearance of the incisal edge.

Packaging:

• 20 g

IPS e.max Ceram Impulse Incisal Edge.

This material is used to achieve an effect known as "halo", which is produced in natural teeth by the refraction of light rays at the incisal edge.

Packaging:

• 20g

IPS e.max Ceram Glaze FLUO powder.

Characteristics:

• It is used in areas of the restoration that have not been veneered with IPS e.max Ceram.
• Additionally, it is applied to frameworks that show no or very little fluorescence

Packaging:

• 5g.

IPS e.max Ceram Glaze powder - glaze in powder form.

Package:

• 5g.

The light-curing material for the stumps stimulates the color of the prepared tooth. This color is the basis for the natural color reproduction of a given oral situation in the further development of all-ceramic restorations.

Package:

• 9 x IPS natural die material (ND1- ND9) 8g each
• 1 x 20 ml separator
• 8 x Handles / contact screws
• 8 x Capacitors / Pistons
• 2 x Universal handles
• 1 x Shade Guide IPS Natural Die Material

IPS Object Fix.

• Heat-resistant auxiliary material in the form of a paste, used for mounting works on firing stands.

• Flow - liquid consistency.

• Putty pasty consistency.

Packaging:

• 1pc/10ml

Ips e.max Ceram Glaze spray.

Package:

• 270 ml

IPS e.max Ceram Gingiva Kit. A set of cramic materials intended for making gum copies.

Packaging:

• 1 x 5 g IPS e.max Ceram ZirLiner Gingiva

• 5 x 20 g IPS e.max Ceram Gingiva, colors: 1, 2, 3, 4, 5

• 4 x 20 g IPS e.max Ceram Intensive Gingiva, colors: 1, 2, 3, 4

• 3 x 5 g IPS e.max Ceram Essence colors: rose, berry, aubergine

• 1 x 1 pc, IPS e.max Ceram Gingiva shade guide

IPS e.max Press HT (High Translucency)

HT ingots are available in 16 colors of the AD key and 4 colors for bleached BL teeth.

Characteristics:

• Due to their high translucency, they are ideal for the fabrication of smaller restorations, e.g. inlays and onlays. HT ingot restorations are characterized by a natural chameleon effect and an unusual adaptation to the hard tissues of the tooth.
• HT ingots are ideal for working with the staining technique, as well as for the cut back technique.
• Stain and characterization firing as well as Glaze firing can be performed with IPS e.max Ceram Shades, Essence and Glaze.
• If a correction is required, it can be done with IPS e.max Ceram ceramic materials.

Package:

• 5 pcs / pack

IPS e.max Press LT low Translucency

LT lozenges are available in 16 AD shades and 4 Bleach BL shades for bleached teeth. Due to their low translucency, they are ideal for making larger restorations, e.g. posterior crowns. Restorations made of LT lozenges are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. LT tablets are suitable for work with the cut bac technique, they can also be used in the painting technique. For the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and characterization should be done with IPS e.max Ceram Essence and Shades.

Packaging:

• 3pcs/pack

IPS Sprue Guide It is used to check the correct fixing of the casting channels. For a ring of 100g

Package:

2 pcs

IPS e.max Press are glass ceramic pellets based on lithium disilicate, intended for PRESS technology. The manufacturing process guarantees obtaining completely homogeneous pellets with varying degrees of translucency. They are characterized by a strength of 400 MPa and are therefore the most durable material of this type. Perfectly fitting restorations are made from them in Ivoclar Vivadent pressing furnaces. The embossed, extremely aesthetic tooth-colored restorations are then painted and/or veneered and glazed with IPS e.max Ceram.

HT lozenges - high translucency Large lozenges

Packaging:

1 pack/3 pcs

IPS e.max Ceram Deep Dentin.

Deep Dentin materials, characterized by fluorescence close to natural, increased opaqueness and color saturation, enable the achievement of natural tooth color even when the amount of space is limited, and thus allow for increased color intensity, especially in the cervical area, which results in a more accurate color match of the gingival span. .

Packaging:

• 20g.

IPS e.max Ceram Incisal incisal material.

Packaging:

• 20g.

Ips E.Max Ceram Add-On - corrective mass.

IPS e.max Ceram Add-On materials are available in four shades.

• Add-On Ceram
• Add-On Incisal
• Add-On Margin
• Add-On Bleach

Packaging:

• 20g

Application:

• Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
• Characterization and veneering of ZrO₂ frameworks in the range of the thermal expansion coefficient 10.5-11.0 x 10⁻⁶K⁻¹ (25-500 ° C);
• Layered veneers on refractory material for stumps;
• Shaping of the gingiva on IPS e.max ZirCAD and IPS e.max ZirPress restorations.

Physical data:

• thermal expansion coefficient 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400 ° C); firing temperature 730 ° C (1st dentin); bending strength (biaxial) ≥ 50 N / mm²; chemical solubility <100 µg / cm².

Packaging:

• 2 Impulse occlusal dentine (OD orange, OD brown) 20 g each;
• 3 Impulse mamelon (MM light, MM salmon, MM yellow-orange) 20 g each;
• 6 Impulse opal effect (OE1-OE5, OE violet) 20 g each;
• 3 Impulse transpa (T blue, T brown-gray, T orange-gray) 20 g each;
• 1 Impulse incisal edge (IE) 20 g;
• 2 Impulse special incisal (SI yellow, SI gray) à 20 g;
• 1 Impulse inter incisal (white-blue) 20 g;
• 4 Impulse cervical transpa (CT yellow, CT orange-pink, CT khaki, CT orange) 20 g each;
• 1 shade guide (Impulse).

IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of gingival tissue, especially during the fabrication of implant-supported restorations.

Colors 1 to 4 intensive materials for the creation of an individual gingival shade.

Package:

• 20g

IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of gingival tissue, especially during the fabrication of implant-supported restorations.

Colors 1 to 5.

Package:

• 20g

Impulse ingots enable the fabrication of restorations with very clear iridescent properties. Opal lozenges are available in two variants with different degrees of brightness (Opal 1, Opal 2). These pastilles are suitable for making veneers with light-colored teeth, where an iridescent effect is needed.

Package:

• 5pcs / 1vial

IPS e.max Ceram ZirLiner.

• Used to characterize white zirconium oxide frameworks.

• Helps match the base color to the base colors in IPS e.max Press and IPS e.max CAD

Packaging:

• 20g.

IPS e.max Ceram Nano-fluoroapatite ceramic for veneering all-ceramic structures. Intended for firing on all IPS e.max components - both made of glass ceramic and zirconium oxide. Thanks to such a combination, a clear scheme of applying individual layers, and a combination of aesthetics and durability of techniques, it can offer the doctor and his patients the maximum brilliance of individual naturalness.

Physical data:

• Coefficient of thermal expansion 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400°C);
• firing temperature 730°C (1st dentin);
• Flexural strength (biaxial) ≥50 N/mm²;
• Chemical solubility <100µg/cm².
• Packaging 100g Available in 16 AD colors

Application:

• Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
• Characterization and veneering of ZrO₂ frameworks in the range of thermal expansion coefficient 10.5-11.0 x 10⁻⁶K⁻¹ (25-500°C);
• Veneers layered on refractory die material;
• Gingival shaping on aus IPS e.max ZirCAD and IPS e.max ZirPress restorations.

Packaging:

• 1pc/100g