Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.

Packaging:

• 1000 ml

Gel, despite its stickiness, spreads easily over the surface and forms a thin layer after drying. STRATOGEL acts as a separating film between the 3D resin and acrylic resin. The product has the right viscosity, effective with just one layer. However, a second layer can be applied when dealing with rougher surfaces (printed models larger than 100 microns). The first layer must be completely dry. The plastic layer is easily removed with water and a brush. STRATOGEL comes off without residue, does not damage acrylic and 3D resin, does not change the properties of resins. It is safe and does not contain any toxic substances.

Benefits:

• Easy application: a single layer is applied with a brush.
• Creates a very thin insulating layer.
• Does not contaminate 3D resin or acrylics.
• Easily removable with water.

Directions for use:

• Apply a few drops directly from the bottle to the dry model and spread it evenly with a brush.
• For quick drying, it is recommended to dry the gel with compressed air at low pressure for 30 seconds, air drying for 30 minutes.

Package:

• 100 ml

SIMPLEX is a dental 3D filament printer. With Slicer software, which was developed specifically for the dental industry, you can print models easily and reliably thanks to the "Plug and Print" concept. The SIMPLEX 3D-filament-printer system covers the entire scope of producing orthodontic models. Thanks to high dimensional accuracy, the SIMPLEX 3D filament printer provides consistent and repeatable results. The produced 3D models do not require post-processing.

Advantages:

• Easy to use thanks to the "Plug and Print" concept.
• Level resolution of up to 50 µm ensures precise results.
• Pleasant operation with low noise level ≤ 49 dB.

Details:

• Process reliability thanks to fiber monitoring system and automated troubleshooting.
• Intuitive navigation on the touch screen.
• Safety thanks to a closed compartment, lockable door and removable cover.
• Heated work table: optimal grip and easy cleaning.
• Simple operation thanks to the removable printing platform.
• Optimal communication between computer and printer via Wi-Fi (currently EU and USA).
• Working with fibers that are harmless to health.

Packaging:

• 1 piece

Light-cured resin, with ceramic filling for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA and THF-MA. Class IIa medical device.

Advantages:

• Very high resistance to breakage and abrasion.
• Natural translucency and opaqueness.
• Easy to grind and polish.
• High biocompatibility.
• No discoloration thanks to low water absorption.
• Long-term color stability.
• Excellent bond with classic dental cements.

Physical data:

• Bending strength > 115 MPa.
• Elastic modulus > 2800 MPa.
• Final hardness > 50 Barcol.
• Water absorption at 40 g/mm3.
• Solubility 7.5 g/mm3.

Packaging:

• 500g

Phrozen Sonic XL 4K 2022

Compact LCD desktop printer with 52 µ accuracy and high light intensity for fast printing times. The high-quality all-metal housing, heated workspace and easy handling of the cuvette make the Phrozen Sonic XL a user-friendly 3D printer for all dental applications.

Color:

• Red.
• White.

Phrozen Sonic XL 4K 2022 printer optimized by Dreve specialists for printing precise dental models. You can print them quickly and conveniently on a large-format construction board. The 3D printer is supplied with Dreve ElementS software, which facilitates the user's work thanks to a friendly interface.

The Phrozen Sonic XL 4K printer, version 2022, is delivered to the user fully calibrated and ready for operation, all that is required is to connect it and you can start printing (plug & play).

We offer professional technical and substantive support.

Sonic XL 4K 2022 is also equipped with a heating and air purification system to improve the printing process.

Characteristics:

• Print volume: 200 x 125 x 200 mm

• 4K resolution

• The LCD display offers incredible ultra-high resolution printing of 3840 x 2160 with a resolution of 52 µm XY.

• 9.3 inch printing area;

• With a 9.3-inch LCD printing area, the Sonic XL 4K 2022 display is much larger than traditional LCD printers.

• Monochrome LCD screen

• Sonic XL 4K 2022 prints up to five times faster than conventional 3D printers, and it only takes about a second to print a layer.

• Solid construction

• The 3D printer is made of aluminum and is designed for a precise, quiet and smooth printing process.

• Large touch screen

• Printing status can be monitored at all times and the printer can be easily managed via the 5-inch touchscreen.

• 12-month warranty. The exception is the LCD screen as a wearing part. There is a 3-month warranty here.

Packaging:

• 1 piece.

Resin bathtub.

Packaging:

• 1 piece.

FEP blank

Packaging:

• 1 piece

Model BioDent® 385 nm

The BioDent® model is a light-curing resin consisting of 50% renewable raw materials. The properties of the material are ideal for the production of models (also in Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• less pollution in the atmosphere
• free of carcinogenic materials
• shorter cleaning times

Material data:

• Color beige opaque
• Modulus of elasticity ≥ 2200 MPa
• Viscosity ~ 0.6 Pa · s
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg bottle.

Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.

Version 3:

• This version of Model Resin is a reformulation of the previous version.
• With the new V3 resin, you can print even more accurate models in half the time.
• Supports print resolutions: 100 and 50 microns.
• Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Packaging:

• 1l

SIMPLEX model isolation, Isolator for 3D printed models from resins and filaments.

Renfert catalog number 17350010

Thanks to the ready-to-use agent, you can easily and safely make orthodontic appliances from dental resin on a printed model. Apply a thin layer of the agent using a brush. Once dry, this layer creates a clear insulation between the printed model and the dental acrylic.

Advantages:

• Suitable for use with models printed from 3D filament and resin.
• Intended for isolating models in the production of removable orthodontic appliances.
• Also suitable for models made using the SLA/DLP printing process.
• One application is enough to achieve optimal separation of the model from the workpiece.
• The agent can be easily removed with water and does not require steam cleaning.
• It does not contain substances harmful to health.

Packaging:

• 1pc/80g

Light-curing resin for the production of denture bases. The material provides accurate results with exceptional dimensional stability. The FotoDent® prosthesis is MMA free and has a stable color.

Material data:

• Final hardness 80 Shore D.
• Modulus of elasticity> 2000 MPa
• Bending strength> 80 MPa
• Viscosity 0.4-0.6 Pa · s
• Pink transparent color.

Packaging:

• 1 kg

Thanks to our many years of experience and cooperation with leading manufacturers of solutions for dental prosthetics, we have developed a new product for you:

EcoPrint: a system for economical printing of prosthetic models thanks to which:

• You can print 6 models in up to 30 minutes.
• You will achieve printing precision in 12K resolution.
• You will optimize the costs of your business - the cost of printing a model is approximately PLN 6.
• You will have the opportunity to print skeletal dentures.

The system includes:

• Reconfigured printer - before delivery to your studio, each EcoPrint printer is reconfigured to meet the highest quality standards set for printers for precise prosthetic models.

• Wash&Cure 2.0 washing and polymerization device - thanks to the use of this device, you can be sure that the printed models will undergo the appropriate post-processing procedure.

• 2 kg of resin for EcoPrint Craftsman DLP models (beige color) - this is the resin we chose due to its unrivaled parameters (accuracy, sharp contours, printing speed).

• Work accessories - everything you need to print your models right after receiving the EcoPrint set (cuvette, strainer for pouring resin, tweezers, masks, LCD thermometer/hygrometer)

• Free implementation of the system in your studio/office - our consultant is waiting for your call, implementation will take only 30-45 minutes and thanks to it you will avoid failures and ensure excellent results already in the first prints. Dental tech. Patryk Baszuk will be happy to answer all your questions and help you run the EcoPrint system, patryk.baszuk@mikran.com tel. 798 748 738

• Free after-sales support during the warranty period.

• Post-warranty service.

• Voucher for a free design of a frame denture in Exocad (we will design a frame denture for you free of charge and you can print and cast it)

• 10% discount on Exocad courses offered by our Digital Training Laboratory.

EcoPrint advantages:

• Low system price.
• Very low operating costs (approx. PLN 6 for the model).
• You will achieve printing precision in 12K resolution.
• High repeatability of results.
• Professional implementation and after-sales support.

Packaging:

• EcoPrint 3D printer + starter kit.

Light-curing, flexible resin for 3D printing. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 40 MPa.
• Elongation > 20%.
• Tear strength > 140 N/mm.
• Final hardness > 75 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, very flexible 3D printing resin. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

• Very high wearing comfort.
• No stress.
• Long-lasting durability and stability.
• High impact resistance.
• Easy to maintain, clean and polish.
• No MMA, THF-MA and TPO.
• Odor and taste neutrality.

Physical data:

• Tensile strength > 25 MPa.
• Elongation > 50%.
• Tear strength > 110 N/mm.
• Final hardness > 65 Shore D.
• Water absorption < 32 µg/mm³.
• Solubility < 5 µg/mm³.

Packaging:

• 1000g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

• Light spectrum 385 nm.
  • Exceptional resistance to cracking and bending.
  • High abrasion resistance.
  • Natural tooth aesthetics, shiny, translucent colors.
  • Easy surface treatment and polishing, which can be characterized individually with composites.
  • Low viscosity ensures low material consumption and faster cleaning.
  • Resistant to conditions in the oral cavity, no odor and taste irritation.
  • Class IIa medical device.
  • Colours: A1, A2, A3.

Packaging:

• 500g

Light-curing, biocompatible resin for 3D printing, for the production of implant guides, transfer keys and occlusal splints.

Advantages:

• Light spectrum 385 nm.
• Transparent formula for visual control in the workspace.
• Process reliability due to high initial hardness and final strength.
• Low viscosity ensures low material consumption and faster cleaning.
• The highest mechanical resistance to bending and cracking.
• Odor and taste neutral.
• Class IIa medical device,
• Colour: transparent.

Packaging:

• 500g

Light-curing resin for 3D printing for dental models.

Advantages:

• For DLP printers with a wavelength of 385 nm.
• Maximum surface hardness and dimensional stability ensure excellent mechanical load capacity.
• Faster workflow without drying process.
• Maximum design precision, feel and stability meet the high demands of model production.
• Optimum edge strength ensures reliable models.
• Colors: sand, light grey, caramel, white.

Physical data:

• Flexural strength > 80 MPa;
• Elastic modulus > 1700 MPa;
• Final hardness > 80 Shore D.

Packaging:

• 1000g

Light-cured 3D resin for producing precise casting objects (skeletons).

Advantages:

• For all UV printers with a light spectrum of 385 nm.
• Excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds.
• Printing results are precise and distortion-free, even for extremely delicate and complex models.
• Any corrections or repairs after printing are possible using easyform gel LC.
• Low viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleaning.
• It burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit.
• Red colour

Packaging:

• 500g or 1000g

EcoPrint printer cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

• 5 pcs

Resin tank foil for Anycubic EcoPrint.

Characteristics:

• Size 278 x 190mm.
• Thickness 0.3mm.
• Permeability 92%.
• ACF foil type.

Advantages:

• Suitable for fast printing.

Attention:

• The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
• The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

• 1 piece

Resin tank foil for Anycubic EcoPrint.

Characteristics:

• Size 278 x 190mm.
• Thickness 0.3mm.
• Permeability 92%.
• ACF foil type.

Advantages:

• Suitable for fast printing.

Attention:

• The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
• The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

• 2 pcs

Light-curing resin for printing thermoelastic, therapeutic dental splints.

Indications:

• Therapeutic splints.

• Diagnostic auxiliary and functional elements.

• Teeth whitening trays.

• Palatal plates.

Advantages:

• High flexibility and abrasion resistance - exceptional break resistance and durability.

• Excellent comfort of use, the material is thermoelastic and tasteless and odorless.

• Transparent – for making rails that are almost invisible.

• Easy to polish.

• Biocompatible.

• Class IIa medical device.

Packaging:

• 1000g

Light-curing resin for printing removable denture plates.

Indications:

• Removable denture plates

Advantages:

• Class IIa medical device

• Comfort of wearing the prosthesis – thanks to precision of workmanship and perfect fit.

• High aesthetics – natural gingival color.

• Compatibility – use with available lining materials.

• Safe removal from build platform.

• Patient acceptance - no taste or smell.

• Biocompatibility.

Packaging:

• 1000g

Light-curing resin for the production of trial prosthetic restorations.

Indications:

• Trial full and partial dentures.

• Transfer and sanding templates.

• Corrective and occlusal impressions.

Advantages:

• Preliminary inspection before making the final prosthesis - checking and, if necessary, adjustment and correction of occlusion, function, pronunciation and aesthetics.

Packaging:

• 1000g

BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.

This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long term skin contact and short term tissue, bone and dentine contact applications.

Resin dedicated to 3D printers from the Form 3B series. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.

In order for physicians and manufacturers to rely on this new material in contact with patients, Formlabs strictly followed USP Class VI procedures to be certified for use in long-term skin applications (greater than 30 days) and short-term contact with tissue, bone and dentin (less than 24 hours). The Formlabs manufacturing facility is ISO 13485 compliant and strict quality control measures are rigorously adhered to.

Technical data:

• The highest tensile strength - 29.1 MPa.
• Modulus of elasticity - .99 GPa.
• Elongation at break - 33%
• Impact resistance (Notched Izod) - 98 J/m.

Packaging:

• 1 liter

Ultrasonic cleaner and UV lamp for printed models.

Technical Specifications;

• Control method: digital tube, LED indicator, control knob
• Rated power: 40W
• Input voltage: AC110 / 240V 50 / 60Hz
• UV light length: 405nm
• Time selection: 1-60 min
• Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
• Washing Basket Size: 192mm (L) * 120mm (W) * 290mm (H)
• Maximum size of object to be cured: 190mm (D) * 245mm (H)
• Libra; ~ 6.5 kg

Package:

• 1 piece

A cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

• 5 pcs

Resin tray 25x35x5cm.

Packaging:

• 1 piece

Convenient strainer for draining the remaining resin after printing.

Packaging:

• 1 piece.

Thermometer and humidity sensor.

Thanks to this device, it is possible to measure the environmental conditions in which e.g. resin for 3D printers and many other materials sensitive to humidity and temperature are stored and used.

Technical data:

• Product type: Temperature and humidity sensor.
• Connectivity: Bluetooth 4.2 LE.
• Power: CR2032 battery.
• Rated voltage: 2.5V - 3V.
• Humidity range: 0%~99%RH.
• Temperature range: 0ºC ~ 60ºC.
• Material: ABS, PMMA.
• Certifications: QB/WSDJ 2401-2019.
• White color.
• Dimensions: 43x43x12.5mm.
• Additional information: Temperature display every 0.1ºC, Humidity display every 1% RH

Packaging:

• 1 piece

Biocompatible Class I resin, for orthodontic applications.

Digitally designed transfer splints enable precise transfer of several brackets to an ideal, virtually pre-determined position on the teeth. This allows not only for more accurate placement, but also for a more effective treatment procedure.

Indications:

• Orthodontic transfer splints for installing brackets.

Advantages:

• Easy to use.
• The translucent V-Print IBT is flexible and allows for easy application and removal of the splint in the patient's mouth.
• No shaking - ready for immediate use.
• Virtually planned brackets are precise, glued safely and faster.

Packaging:

• 1000g

Light-curing resin for the production of therapeutic splints.

Indications:

• Medicinal splints.
• Auxiliary parts and functional parts for diagnosis.
• Whitening trays.

Advantages:

• Class IIa medical device.
• Biocompatibility and neutral taste ensure a high level of patient acceptance.
• The wavelength of 385 nm allows for aesthetic, clear and transparent printing.
• High bending strength.
• High precision and, consequently, accurate fit ensure high wearing comfort.

Packaging:

• 1000g

Resin tank for the Mars 4 Ultra printer.

Packaging:

• 1 piece

Light-curing resin for the generative production of individual trays, base plates and occlusal templates.

Indications:

• Individual impression trays, functional impression trays.
• Occlusal template plates and trial dentures.
• Short circuit registration.

Advantages:

• Time savings - ability to print with high layer thicknesses (up to 200 µm).
• Impressions free from distortions – thanks to high durability.
• Universal – suitable for all types of impression materials.
• Speed and efficiency – printing various elements, e.g. shaping the margins, making retention elements or recesses for implant impressions.

Packaging:

• 1000g

The multi-purpose SIMPLEX filament provides a natural surface effect due to the high content of hard plaster. Offers a high level of detail. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. It can be easily processed with rotary instruments or a scalpel. Printing temperature: 205-220 ° C

Data:

• Gypsum fiber Ø 1.75 mm
• 1 x 800 g
• White color

ACF foils for the Mars 4 Ultra printer.

Packaging:

• 5pcs/1pack

The special SIMPLEX aligner filament is tailored to the special requirements of aligner production and the thermoforming technique. It is conducive to pleasant work because it does not contain irritating ingredients. It does not emit unpleasant fumes during the printing process. No finishing, no annealing. Printing temperature: 235-255 ° C

Details:

• Heat-resistant special filament Ø 1.75 mm,
• 1 x 800 g
• White color

Package:

• 1 piece

• The SIMPLEX filament for working models provides high detail.
• It is conducive to pleasant work because it does not contain irritating ingredients.
• Does not produce unpleasant fumes during the printing process,
• Suitable for recycling and industrial composting.
• Printing temperature: 190-230 ° C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• green color

The filament for the demonstration model made of SIMPLEX biofibers offers a high level of detail and sharpness of diagnostic models. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. Printing temperature: 190-230 ° C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• White color

Package:

• 1 piece

LCD screen for the Mars 4 Ultra printer.

Packaging:

• 1 piece

F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums. F80 resin can maintain its softness even at lower temperatures.

Advantages:

• F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
• F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
• Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
• F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
• Printer Compatibility - All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 50-60A.
• Tensile strength ASTM: D638-14 3.8 MPa.
• Tear strength ASTM: D624-98 9.75 KN/m.
• Elongation at break ASTM: D638-14 159%.
• Viscosity (25℃) ASTM: D4212-10 2300mpa.s.

Manufacturer's recommendations:

• If the resin will not be used in the 3D printer for more than 1 day, it is recommended to filter the resin using a funnel with a filter and pour it into an empty container. Do not pour the resin from the tank back into the original bottle to avoid contamination with other resins.

Packaging:

• 500g

Light-curing resin for printing elements fired during casting and pressing.

Indications:

• Production of elements that are completely removed from the mold before the casting or pressing process, leaving no residues.

Advantages:

• Repeatable – simple duplication before casting.

• Fast finishing, precision.

• Printed elements guarantee high quality reproduction.

• High dimensional stability and edge strength - safe checking of occlusion and lateral movements.

• Excellent compatibility – the resin can be used with available refractory compounds.

Packaging:

• 1000g

The Mars 4 Ultra 3D printer is equipped with a 7-inch monochrome 9K LCD display with a resolution of 8520x4320, which records every smallest detail, allowing you to create precise models.

Technical data:

• 7-inch, monochrome LCD display with 9K resolution.
• Resolution 8520x4320.
• Printing speed 30-70 mm/h, up to 150 mm/h. in "speed" mode
• Fast Wi-Fi transfer.
• Linux operating system 4 GB RAM.
• 4-point leveling system.
• Working area 153.36 x 77.76 x 165 mm³.
• Weight 7 kg.

Packaging:

• 1 piece

Light-curing resin for printing dental models.

NO SHAKE – ALWAYS HOMOGENEOUS!

Indications:

• Working and demonstration models.

Advantages:

• Speed and accuracy – optimal adjustment even with layers 100 μm thick.

• Safe machining – no undesirable surface changes (e.g. caused by increased tool temperature).

• Surface resistance to scratches - high hardness allows optimal adjustment of prosthetic restorations without their deformation.

• The product can be used in thermoforming devices - precise work, obtaining models for overlays and retainers.

Packaging:

• 1000g or 5000g

Light-curing resin for printing dental surgical templates.

Indications:

• Dental surgical templates

Advantages:

• Class IIa medical device.

• Perfectly accepted by patients - tasteless and odorless.

• Optimal patient safety.

• The templates can be sterilized in an autoclave at 134°C for 5 minutes.

• Dimensional stability – perfect fit, even after autoclaving.

• Biocompatibility.

Packaging:

• 1000g

Work platform for the Mars 4 Ultra printer.

Packaging:

• 1 piece

Dental 3D printer for orthodontics, prosthetics and implantology.

Printing technology:

• Low Force Stereolithography™ (LFS).
• Working area 145 × 145 × 185 mm.
• Layer height 25 – 300 microns.
• Laser spot size 85 micrometers.

The Formlabs Form 3B+ 3D printer was created specifically for dental applications. High printing precision was achieved thanks to the use of an improved version of stereolithography (SLA). The laser spot is only 0.085 mm, which gives ultra-precise dimensional accuracy. LFS technology enables fast, efficient and reliable manufacturing with a precision of 25 micrometers. This is confirmed by the reputation of Formlabs devices. The availability of 20 materials for 3D printing, including dental and biocompatible materials, translates into wide use in orthodontics, implantology and prosthetics. An improved optical system, updated 3D printer software and new components make the latest version of the Form 3B+ 3D printer guarantee even greater reliability, precision and speed of 3D printing.

Advantages:

• The Form 3B+ 3D printer is compatible with PreForm software, Formlabs dental resins and post-processing devices: Form Wash and Form Cure.
• Convenience of use, easy and clean operation, thanks to replaceable 1-liter material cartridges. Upload designs for printing via Wi-Fi, USB or Ethernet.
• Technical support, you can count on our help at the stage of choosing a 3D printer, as well as after the purchase. We provide professional training, technical support and post-warranty care.

Technical data:

• Working area: 145 x 145 x 185 mm
• Materials: Standard, Castable Wax, Denture Base and Teeth, Dental Model, Dental SG, Dental LT Clear
• Laser spot diameter: 85 micrometers
• Laser power: 250 kW
• Software: Preform
• Layer height: 25-300 micrometers
• Dimensions: 405 x 375 x 530 mm
• Weight: 17.5 kg

Packaging:

• 1 piece

Impressive precision with every print, version B with a full license for professional dental resins.

Formlabs has developed a new version of the SLA technology to achieve even better results in printing with photopolymer resins. Formlabs Form 3 3D printer uses LFS (Low Force Stereolithography) technology, which ensures even higher precision of production with increased printing speed. Thanks to the reduced laser spot to 85 micrometers, we can achieve unrivaled accuracy of mapping each detail. In turn, built-in sensors monitor the operation of the device and maintain constant conditions during printing, which guarantees repeatability of production. Get the unparalleled precision of 3D printing in even less time.

printing technology:

Low Force Stereolithography (LFS)

working area:

145 × 145 × 185 mm

layer height:

25 - 300 microns

laser spot size:

85 microns

Smooth surface of prints The support structures are even thinner, so that the models have a smooth surface. Easier removal of supports also means shorter processing time of prints.

More accurate representation of details The improved optical system controls a laser beam with a size of 85 micrometers. This ensures exceptional precision and quality of detail reproduction.

SLA technology in a new edition Developed by Formlabs LFS (Low Force Stereolithography) technology allows you to print with much greater precision compared to other SLA 3D printers.

Complete ecosystem The Form 3 3D printer is compatible with PreForm software, Formlabs resins, the worktable used in Form 2, and the Form Wash and Form Cure post-processing equipment.

Convenient file transfer Upload print projects via Wi-Fi, USB or Ethernet. Manage your prints conveniently on the 5.5 inch touch screen.

Technical support You can count on our help at the stage of choosing a 3D printer, as well as after the purchase. We provide professional training, technical support and post-warranty care.

Designed for printing models of crowns and bridges with replaceable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details down to 35 microns and removable stencils with a consistent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital model production.

Packaging:

• 1 liter

A resin with first class biocompatibility, intended for dentists to create precise surgical templates. Prints made of this material can be sterilized in an autoclave and are allowed to come into contact with skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implant procedures. After final processing, prints made of this material can become fully transparent for better positioning.

Recommended printing on a layer of 100 or 50 micrometers (Form 2) and 100 micrometers (Form 3B).

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic)
• ISO 10993-10:2010/(R)2014 (non-sensitizing)
• ISO 10993-10:2010/(R)2014 (non-irritating)
• EN ISO 13485:2016
• EN ISO 14971:2012

Packaging:

• 1 liter