Cervical wax, eggplant color.

Characteristics:

• Flexible, stress-free, soft and non-shrinking special wax for modeling the cervical edges of crowns, precision parts and inlays.
• Cervical wax burns without leaving any residue, making it also suitable for the ceramic pressing technique.
• It has a very low elastic limit, so any deformation has only a plastic effect. This allows for safe modeling of thin plates up to the preparation border.
• Freezing point approx. 62°C.

Packaging:

• 70g

New Cutters for CHROM-COBALT and CHROM-NICKEL alloys.

Advantages:

• For rough grinding.
• The surfaces of the cutters are equipped with additional cutting edges.
• More efficient and faster grinding.
• Increased durability.
• Max speed 20,000 rpm.

Packaging:

• 1 piece.

Erkoflex foil 125x125x1.5mm

For making splints for whitening, fluoridation, bite splints, transfer splints for brackets, positioners.

Characteristics:

• Soft.
• Square 125x125mm.
• Made of ethyl vinyl acetate (EVA)

Packaging:

• 10 pcs.

Erkoflex foil 120x1.0mm

Characteristics:

• Soft.
• Diameter 120mm.
• Thickness 1.0mm.
• For making splints for whitening and fluoridation.
• Made of ethyl vinyl acetate (EVA).

Packaging:

• 100 pcs.

Agate spatula for mixing porcelain on a ceramic palette.

Packaging:

• 1 piece

Micromotor clamp holder for pencil erasers.

Packaging:

• 1 piece.

Sponge eraser for processing thermoplastic materials, medium grain. Spongy scotch brite material is embedded in rubber with appropriate abrasion, thanks to which its durability is significantly extended. The elasticity of the rubber combined with the scotch brite material, which astringent ductile thermoplastic materials, allows for very thorough and long-lasting polishing of these difficult materials.

• Recommended working speed - min. 6000 - max. 20000 rpm.
• Diameter - 26mm,

Packaging:

• 1 piece

Graphite insert for the gold casting crucible.

Packaging:

• 1 piece.

Type A silicone for duplicating models made of materials such as plaster, investment material, resins, wax, etc.

Description:

• It is characterized by high pourability, which guarantees high accuracy of reproduced details, with a relatively quick setting time.
• It can be used both in the technology of manufacturing frame dentures, flexible dentures, creating control models, as well as in other technological processes requiring the duplication of a specific element, with a specific shape, including modeling resin (e.g. Form Plast).
• AUROSIL 20 FAST FORM can be used to create a negative form when making dentures using the pouring technique (e.g. from Villacryl SP acrylic material)

Advantages:

• Optimally fluid consistency when pouring.
• Accurate flow and reproduction of all details of the replicated model/element.
• Fast setting time.
• Effective in all dental techniques (and not only) that require duplication.
• Minimal linear shrinkage (<0.1%)
• Optimal hardness facilitating the release of the model/element from the silicone mold.
• No release of toxic substances during and after hardening.

Technical data:

• White and orange color.
• Mixing ratio 1:1.
• Operating time at 23°C*, 50% humidity: 2 – 3 min.
• The time to release the model from the mold is approximately 20 minutes.
• Shore A hardness after 30 min: 15 – 21 ShA.
• Shore A hardness after 24 hours: 16 – 23 ShA.

Packaging:

• Aurosil A 1 kg + Aurosil B 1 kg

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at a temperature of 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Diamond Milli- Micron 15,000 - 30,000 rpm.
• Application - chrome-cobalt, porcelain.

Packaging:

• 1 piece.

Sponge eraser for the processing of thermoplastic materials, fine-grained. Spongy scotch brite material is embedded in rubber with appropriate abrasion, thanks to which its durability is significantly extended. The elasticity of the rubber combined with the scotch brite material, which astringent ductile thermoplastic materials, allows for very thorough and long-lasting polishing of these difficult materials.

• Recommended working speed - min. 6000 - max. 20000 rpm.
• Diameter - 26mm,

Packaging:

• 1 piece

Sponge eraser for processing thermoplastic materials, very fine grain. Spongy scotch brite material is embedded in rubber with appropriate abrasion, thanks to which its durability is significantly extended. The elasticity of the rubber combined with the scotch brite material, which astringent ductile thermoplastic materials, allows for very thorough and long-lasting polishing of these difficult materials.

• Recommended working speed - min. 6000 - max. 20000 rpm.
• Diameter - 26mm,

Packaging:

• 1 piece

Sponge eraser for processing thermoplastic materials, medium grain. Spongy scotch brite material is embedded in rubber with appropriate abrasion, thanks to which its durability is significantly extended. The elasticity of the rubber combined with the scotch brite material, which astringent ductile thermoplastic materials, allows for very thorough and long-lasting polishing of these difficult materials.

• Recommended working speed - min. 6000 - max. 20000 rpm.
• Diameter - 26mm,

Packaging:

• 1 piece

Half-round wax sticks 2.0x1.0mm.

Packaging:

• 50g/pack

Sponge eraser for the processing of thermoplastic materials, fine-grained. Spongy scotch brite material is embedded in rubber with appropriate abrasion, thanks to which its durability is significantly extended. The elasticity of the rubber combined with the scotch brite material, which astringent ductile thermoplastic materials, allows for very thorough and long-lasting polishing of these difficult materials.

• Recommended working speed - min. 6000 - max. 20000 rpm.
• Diameter - 26mm,

Packaging:

• 1 piece

Anatomical tweezers

• Length 30cm.

Packaging:

• 1 piece.

Abrasive belt, metal.

• Width 6mm.
• Length 13.5 cm.

Packaging:

• 1pack/12pcs

Soft, stretchable 16µ polyethylene film. The flexibility and soft color coating of hydrophilic soft waxes allows precise control of the actual contact points.

Characteristics:

• Color red, green, blue.
• Thickness 16µ
• Sheet 70x100mm

Packaging:

• 1pack/50 sheets

Mold for model bases.

Characteristics:

• Made of flexible material.
• Different sizes top and bottom.

Sizes:

• Top L 10×7.7 cm.
• Top M 8.7×6.8 cm.
• Top S 7.5×5.7 cm.
• Bottom M 8.7×6.5 cm.
• Bottom S 8×5.7 cm.

Packaging:

• Set of 5 pcs

Porcelain modeling tip.

Packaging:

• 1 piece.

Foundry funnel, burning without residues.

Packaging:

• 1 piece

Super flexible double-sided separator for separating and contouring ceramics.

Characteristics:

• Mounted on a mandrel.
• Diameter 22mm.
• Thickness 0.17mm.
• Red stripe.
• 5' - 10000 rpm.

Packaging:

• 1 piece.

Sticky wax in sticks, used for gluing metal elements of crowns, bridges, pin teeth, before soldering and for a whole range of auxiliary works in dental technology.

Packaging :

• 100g(20 sticks)

OccluSense, a device used to diagnose, record and display short-circuit conditions by applying appropriate pressure at the points of contact or masticatory force distribution.

• The OccluSense® handheld device is a battery-operated device that wirelessly transmits recorded data to the OccluSense® iPad app over a local network.
• Thanks to the technologically advanced OccluSense® pressure sensors, chewing forces can be recorded at 256 levels of pressure. The thin and flexible material allows both static and dynamic occlusion. In addition, the red-coated sensor marks the occlusal contacts on the patient's teeth.

Packaging:

• Handheld device.
• Inductive charger.
• Test sensor.
• A box of 25 OccluSense® sensors in a convenient carrying case.

Double-sided separator with a diamond coating mounted on a holder.

Features:

• Diameter 22x0.30mm.

Package:

1 piece.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 50x20mm.

Packaging:

• 1 piece.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 50x25mm.

Packaging:

• 1 piece.

• Pressure polymerizer intended for technical and dental laboratories.
• Made of stainless steel, INOX with a pressure gauge is perfect for the polymerization of acrylic masses.
• In particular for: repairs, temporary crowns, removable orthodontic appliances, parts of acrylic skeleton dentures.
• Thickened bottom
• Separate outlet valve
• Safe lid opening and closing mechanism

Advantages:

• Protection against uncontrolled pressure increase
• Sufficient space for the articulator
• Suitable for polymerization of most acrylic masses

Technical data:

• Capacity: 7 liters
• Maximum temperature (°C) - 65 °C
• Max pressure (bar) - 2 bar
• Inner diameter 22cm
• Internal height 21cm
• Weight (kg) - 3.2 kg
• 12-month warranty (does not include the gasket)

Packaging:

• 1 piece

Erkoloc PRO foil 120x1.3mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Round Ø 120mm, thickness 1.3mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate-glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 20 pcs

Erkoflex foil 125x2.0mm

Characteristics:

• Soft.
• Round diameter 125 mm.
• For making rails for carrying locks and protectors for athletes.

Packaging:

• 10 pcs

Erkoflex bleach foil 120x1.0mm.

For making splints for overlay whitening, fluoridation and other drug carriers.

Characteristics:

• Soft and flexible.
• Round 120 mm.
• Made of ethylene vinyl acetate (EVA)

Packaging:

• 20 pcs

Textile brush for polisher. Diameter100mm.

Package:

• 1 piece.

Sensor coated with pigment for Bausch OccluSense.

• It is equipped with electronic sensors for occlusion testing and tracing paper.

• The thickness of the sensor together with the tracing paper is 60 microns.

• The sensor is a disposable product packed sterile, not suitable for reuse.

• Standard and XL sizes.

Packaging:

• 1pack/25pcs

Perforated, round, interleaved wax retentions.

Package :

• 25 pcs / pack

• Polishing cover made of powder-coated sheet metal, with a removable plastic tray.

Packaging:

• 1 piece

Crucibles for Ducatron and Fornax reinforced.

Package:

• 1 piece.

Anatomical tweezers 11cm.

Package:

1 piece.

ProBase Hot is an acrylic material polymerizing at elevated temperature. It introduces a new quality standard for removable dentures made using the canning technique. The physical and mechanical properties of the material guarantee ease and reliability of work regardless of the selected polymerization technique.

Characteristics:

• Easy to use.
• Shape and color stability.
• Fine-grained structure.
• Several polymerization methods.
• No cadmium in the dye
• Compliance with the EN ISO 1567 standard.

Indications:

• Complete dentures,
• partial dentures,
• Combination dentures

Packaging:

500g.

Kneton - Lab 95 laboratory kneading mass based on polysiloxane, condensation cross-linking.

For use in cold and hot formed polymers.

Particularly suitable for making base models for repairs.

Characteristics:

• Shore A hardness 95.
• Very hard.
• Easy to earn.
• Dimensionally stable.

Packaging:

• 900ml.

Kneton, activator for Kneton - Lab 95 silicone

Packaging:

• 35ml.

Model wax is used to make models of basic dentures.

Characteristics:

• Soft wax.
• Light pink color.
• Based on natural beeswax

Package:

• 500g. (24 plates)

Agatos - phosphate cement. A preparation consisting of powder and liquid. The main ingredient of the powder is zinc oxide and the liquid is phosphate acid. When mixed together in appropriate proportions, the ingredients form basic zinc phosphate.

Application:

• Primer for any type of filling.
• Material for temporary filling of cavities in primary teeth.

Packaging:

• 30g of powder.
• 18g of liquid.

Wiedent teeth acc. Thanks to the three-layer structure and the fluorescent effect, Vita imitates natural teeth in a way that is close to perfect. The varied assortment makes it possible to permanently or movably supplement all kinds of cavities in patients' teeth, both in terms of shape and color.

Characteristics:

• They are three-layer, with a fluorescent effect, with anatomical shapes.
• They are manufactured in accordance with PN EN ISO 3336:2000 and EN ISO 7491:2000 standards.
• They do not contain any of the harmful substances listed in Directive 67/548/EEC.
• They require dewaxing with boiling water and degreasing with acrylic monomer in order to obtain an optimal connection with the denture plate.
• They can be a source of dust during prosthetic work, it is recommended to use appropriate personal protective equipment to avoid dust inhalation.
• In dentures, they can only be washed with toothpaste and toothbrushes or denture care products.
• Store in a clean, dry place out of direct sunlight.
• Best used within 9 years of production.

Application:

• Complete dentures.
• Partial dentures.
• skeletal prostheses.

Packaging:

• flap 6 pcs.

Wiedent teeth acc. Thanks to the three-layer structure and the fluorescent effect, Vita imitates natural teeth in a way that is close to perfect. The varied assortment makes it possible to permanently or movably supplement all kinds of cavities in patients' teeth, both in terms of shape and color.

Characteristics:

• They are three-layer, with a fluorescent effect, with anatomical shapes.
• They are manufactured in accordance with PN EN ISO 3336:2000 and EN ISO 7491:2000 standards.
• They do not contain any of the harmful substances listed in Directive 67/548/EEC.
• They require dewaxing with boiling water and degreasing with acrylic monomer in order to obtain an optimal connection with the denture plate.
• They can be a source of dust during prosthetic work, it is recommended to use appropriate personal protective equipment to avoid dust inhalation.
• In dentures, they can only be cleaned with toothpaste and toothbrushes or denture care products.
• Store in a clean, dry place out of direct sunlight.
• It is best to use it within 9 years from production.

Application:

• Complete dentures.
• Partial dentures.
• skeletal prostheses.

Packaging:

• flap 8 pcs.

Textured casting wax (morka) green, clearly veined, thickness 0.6mm 15x7.5cm.

Features:

• Proven wax for modeling of maxillary skeletal dentures.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres exactly to the model.

Package:

15 items / box

ProBase Cold is a self-curing acrylic material. ProBase Cold dentures can be fabricated using two different techniques - pouring and placing. In both cases, works of the highest quality are obtained.

Features:

• Ease of working with the material.
• Permanence of shape and color.
• Two techniques of work.
• No cadmium in the dye
• Complies with EN ISO 1567.

Indications:

• Complete dentures.
• Partial dentures.
• Denture relining.
• Repairs.

Package:

500g.

Triplex Hot is an acrylic material that polymerizes at high temperature.

Characteristics:

• Intended for making dentures with the application technique.
• Standard polymerization method (recommended) - Place the framed can in a vessel with cold water. Heat the water to 100 °C. Keep boiling for 45 min.
• Alternative polymerization method - Place the can in the frame in a vessel with boiling water and keep it boiling for 20 minutes.
• Pink color with veins.

Indications:

• Complete dentures.
• Partial dentures.
• Combined dentures.
• Relines

Packaging:

• 500g.

Brass pins without needle No. 2 for making split models.

Characteristics:

• Length 22 mm.
• Easy to attach to the model.
• Size no. 2 without needle.

Packaging:

• 100 pcs or 1000 pcs

A comfortable pad for the desk, keyboard and mouse. Dimensions: 90cm x 40cm Includes EXOCAD hotkeys.

Packaging:

• 1 piece

Investment material for partial dentures, which is an improved version of Wirovest. A characteristic feature of this mass is the extended time to start setting. Suitable for duplication in agar and silicone. It is recommended to heat the Wirovest Plus mass using a conventional method. Regardless of the method of duplicating and mixing, it guarantees perfect matching accuracy. Gives a very smooth surface of models. To mix it, use Begosol liquid.

Technical data:

• Liquid: Begosol.
• Processing time 3 min 15 s;
• Linear thermal expansion 1.15% at 40% BegoSol;
• Total linear expansion approx. 2.3% at 40% BegoSol;
• Compressive strength approx. 15 N/mm²;

Packaging:

• Bag: 400g or carton 45x400g