Semicircular wax profiles 1.8x0.9 mm
Semicircular wax profiles 1.8 x 0.9 mm
Characteristics:
- No surface tension.
- Very smooth.
Packaging :
50g.
4x2 mm sublingual wax profiles
Sublingual wax arches for the lower jaw
Features:
- Teardrop shape.
- 4.0x2.0mm.
Package :
65g / pack
RN and Dentaurum wax templates
RN wax templates and thick retention grid.
Characteristics:
- Made of the best raw materials.
- No fillers, burning without residue.
Packaging :
20 pcs/pack
3.0 mm Bego wax wire
Wax wire for casting channels.
Characteristics:
- green color
- medium-hard
- thickness 3.0 mm.
- easy to shape, does not bend and burns without residue.
- high resistance to deformation and compression during forming.
Packaging:
- Roll 250g. (approx. 36m)
3.5mm Bego wax wire
Wax wire for casting channels.
Characteristics:
- Green color.
- Medium-hard.
- Thickness 3.5mm.
- Easy to shape, does not bend and burns without residue.
- High resistance to deformation and compression during forming.
Packaging:
- Roll 250g (approx. 28m)
Textile brush 95x5.5mm
Polishing brush, textile made of white cloth.
Characteristics:
- Diameter 95mm.
- Thickness 5.5 mm.
- Metal center.
- For use on a polisher.
Packaging:
- 1 piece.
Kromotypo 4 super hard gypsum 5kg
Kromptypo 4. Class IV extra hard prosthetic plaster with chromatic setting phase indicator for making models with high compressive and abrasion resistance.
Characteristics:
- Final color: pastel yellow.
- Water to powder ratio: 22ml/100g.
- Absorption time: 20 seconds.
- Mixing time (manual): 60 seconds.
- Mixing time (mechanical): 30 seconds.
- Pouring time: 3 minutes.
- Setting time: 7 minutes.
- Separation time after setting: 25-30 minutes.
- Expansion setting (after 2 hours): 0.08%
- Compressive strength (after 24 hours): 81 MPa, 11,740 psi, 828 kg/cm2.
- Rockwell hardness (after 24 hours): 85 HRL.
Packaging:
- 5kg
Stones for working metal
Abrasive stones for finishing metal grinding, mounted on a mandrel.
Packaging:
- 1 piece.
A holder for rubber bands for a handpiece
A holder (mandrill) for rubber bands and brushes on a cylinder or disc handpiece.
Packaging:
- 1 piece.
Felt cone 35x20mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 35x20 mm.
Packaging:
- 1 piece.
Felt cone 40x20mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 40x20 mm.
Packaging:
- 1 piece.
Basic Classic Sandblaster 2 tanks 25-70 µm/70-250 µm
The Basic Classic sandblaster is the perfect first step into the world of professional sandblasting techniques with pen sandblasters. Compact device in basic configuration with up to 2 tanks. Thanks to its slim design, the sand spreader finds its place even in the smallest spaces. Two sand tanks, e.g. filled with sand 25-70µ and 70-250µ, cover all standard requirements of dental technology, e.g. for precious metals and porcelain.
Renfert catalog number 29472025
Advantages:
- Precise work thanks to the unique technology used in the mixing chamber (using the Venturi principle).
- Tool-free expansion to 2 tanks.
- Using the tank switch located inside the sandblaster chamber ensures efficient operation.
- 36-month warranty
Technical data:
- Mains voltage 220-240 V, 50/60 Hz
- Working pressure 1-8 bar
- External connection pressure 5-8 bar
- Air consumption at 6 bar (87 psi) 98 l/min
- Lamp power 16 W
- Cable length 2 m
- Dimensions (width x height x depth) 350 x 270 x 470 mm
- The size of the sandblaster chamber is 14 l
- Capacity of 1 tank 1000 ml
- Weight (unfilled) 6.5 kg
Packaging:
- 1 piece.
Prosthetic sand 250 µm 5 kg
Sand for the sandblaster 250 microns.
Composition:
- Al2O3 content: over 99%
- Admixtures: Na20, K20, CaO, SiO2 and Fe2O
- Specific density: 3.95 +/- 0.5 g/cm3
- Bulk density: 1.52- 1.85 g/cm3
- Hardness: over 9 on the Mohs scale
- Grain shape: sharp-edged
Packaging:
- 5kg.
Reinforced mandrel for 8mm handpiece
Reinforced mandrel for 8mm handpiece, for rubber bands, brushes and stones.
Packaging:
- 1 piece.
Wax templates for premolar and molar clasps
Wax profiles of clasps for molars and premolars, medium-hard, maintaining their shape.
Characteristics:
- On the molars and premolars, the semi-drop cross-section prevents the deposition of food remains and increases the stability along the entire length of the clasps, giving it a very slim shape.
- Very good acceptance by patients.
Packaging:
- 280 pcs of buckles/pack.
Mittel crimped wax 0.6 mm
Textured casting wax (morka), green.
- Plate thickness 0.6mm
- Medium veined (mittel)
- Size 15x7.5cm.
Characteristics:
- Proven wax for modeling maxillary denture plates.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres precisely to the model.
Packaging:
- 15 pcs/pack
Chamois brush 80x5.5mm
Chamois leather brush for polisher.
The material from which the brush is made dries out after some time and must be moistened to regain its properties.
Brush diameter 80 x 5.5 mm.
Packaging:
- 1 piece.
Large armored disc for Keystone polisher
Armored shield for a polisher.
- Diameter 100mm.
Packaging:
- 1 piece.
Plaster class III Stodent Ortho 25kg
Stodent III Ortho is a type 3 hard orthodontic plaster recommended for archival, diagnostic and working models when making removable orthodontic appliances.
Description:
- Glossy white color.
- Small expansion.
Advantages:
- Smooth surface.
- Easy to prepare and process.
- Surface resistance to abrasion.
Technical data:
- Mixing proportions approx. 28-30 ml / 100 g.
- Mixing time (vacuum) 30 s.
- Mixing time (manual) 60 – 90 s.
- Setting time 10 -14 min.
- Release time from the impression 45 min.
- Compressive resistance (after 1h ) 25 ± 2 MPa [> 20 MPa]
- Linear expansion (after 2 hours ) max. 0.15% [< 0.20 %]
Packaging:
- 25kg
Attention:
- Due to the heavy weight of the goods (25 kg), an additional fee will be added to the shipment.
Retention of split models 500 pieces
Retentions of split models.
- Elements connecting plaster layers in split models.
- They provide a very good connection.
- They don't drown.
- They can be easily cut without damaging the saw blades.
Packaging :
- 500 pcs.
Villacryl H plus 750g+400ml + Iso-sol 250ml
Villacryl H Plus, a hot-polymerized polymethacrylate material, intended for making base plates of full and partial dentures.
Characteristics:
- Easy to prepare and process.
- Provides comfort when using the prosthesis.
- High aesthetics of the prosthesis thanks to natural colors.
- Increased mechanical strength.
- Does not contain heavy metals and tertiary amines.
- Biologically neutral.
Technical data:
- Mixing proportions 24 g powder / 10 g (10.5 ml) liquid.
- Dough preparation time 20-25 minutes. (at 23 °C)
- The shelf life of the dough is 25-30 minutes. (at 23 °C)
- Polymerization process 30 min. – 60°C→100°C, 30 min. – 100 °C, 30 min. – air cooling.
- Breaking strength > 65* MPa.
- Solubility < 1.6* µg/mm3.
- Sorption < 32* µg/mm3.
Packaging:
- 750g powder/400ml liquid
Remanium CSe 1 cube
Remanium CSe alloy of the latest generation for ceramics in the crown and bridge technique.
Characteristics:
- Very good ceramic adhesion, even after several firings.
- Contains no beryllium, biologically compatible.
- Resistant to corrosion in the mouth.
Chemical composition:
- Ni 61%.
- Cr 26%.
- Mo 11%.
- Si 1.5%.
- Co,Fe,Al,Ce <1%.
Technical data:
- Yield strength Rp0.2 - 340 MPa.
- Tensile strength Rm - 580 MPa.
- Hardness HV 10 - 195.
- Total elongation after tearing A5 - 15%.
- Yung modulus (longitudinal elasticity coefficient) - 170,000 MPa.
- Density - 8.2 g/cm3.
- WAK (25- 500 C) 14x10- 6K- 1.
- Initial melting point - 1280 °C.
- Final melting point 1350 °C.
Packaging:
- 1 piece
Solders for chrome-cobalt (Kobalt-Chrom-Lot)
Solder sticks for all cobalt chrome alloys for framework dentures.
Characteristics:
- Melting range 1100-1150 °C.
- Operating temperature 1180 °C.
- Fluxol - Fluxol.
- Percent composition by weight : Cr 61; Cr 28.5; Mo 3.5; Si 4; Fe;B;C.
Packaging:
- min 4g.
Separating Fluid 500ml
Separating Fluid exhibits exceptional separating properties and thus optimally insulates all denture base materials and ensures smooth surfaces.
- Insulation: plaster / acrylic, plaster / plaster.
Package:
- 500 ml.
Gypsum class III Stodent light green - mango scent 3kg
Stodent III is a type 3 hard plaster recommended for antagonist models and working models when making removable and skeletal dentures.
Description:
- Light green color enriched with mango aroma.
- Small expansion.
- Good mechanical properties.
Advantages:
- Smooth surface.
- Easier model making thanks to high thixotropy.
- High resistance to fracture when released from the impression.
Technical data:
- Mixing proportions 30 ml / 100 g.
- Mixing time (vacuum) 30 s.
- Mixing time (manual) 60 – 90 s.
- Setting time 10 -14 min.
- Release time from the impression 45 min.
- Compressive resistance (after 1h ) 25 ± 2 MPa [> 20 MPa]
- Linear expansion (after 2 hours ) max. 0.15% [< 0.20 %]
Packaging:
- 3kg.
Diadur Stones for porcelain and metal DD-22 / 4g
Diadur - Ceramic stones with diamond coating.
Embankment:
- coarse
Advantages:
- maintains its shape during wear.
- excellent durability
- heat resistant, does not overheat during operation.
- recommended working speed 10,000 - 15,000 rpm. max. 35,000 minutes
Packaging:
1 piece.
Gray Ecoceram rubber disc, 10 pieces
For finishing and polishing porcelain restorations.
- Diameter 22 mm.
Advantages:
- The silicone bond adapts to the surface being treated
- Silicon carbide abrasive.
Packaging:
- 10 pcs
Ecoceram gray lens eraser, 10 pieces
For finishing and polishing porcelain restorations.
- Diameter 22mm.
Advantages:
- The silicone bond adapts to the surface being treated
- Silicon carbide abrasive
Packaging:
- 10 pcs
MicroTorch burner for lighter gas Type I
MicroTorch Type I burner
Characteristics:
- Once filled, it is enough for 60 minutes of continuous operation.
- For use in dental and prosthetic offices.
- Filled with lighter gas (propane-butane).
- Easy to use.
- Achievable temperature: 1300 °C
- 3 months warranty.
Packaging:
- 1 piece.
Habras Disc Pro, brown 36 grit
Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.
Characteristics:
- assembled.
- shank diameter 2.35 mm.
- ø 25mm.
- Recommended operating speed 5000 rpm.
- 3 dials on one mandrel.
- Grit 36, extra coarse .
- Brown color.
Packaging:
- 1 piece
Habras Disc Pro, Green, 50 grit
Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.
Characteristics:
- assembled.
- shank diameter 2.35 mm.
- ø 25mm.
- Recommended operating speed 5000 rpm.
- 3 dials on one mandrel.
- Grit 50, very coarse .
- Green color.
Packaging:
- 1 piece
Magnum steel chrome-nickel-iron (Ni-Cr-Fe)
Nickel-chrome prosthetic alloy, non-precious, for cast crowns and bridges veneered with acrylic or composite. Chromium-nickel steel enriched with molybdenum allows the use of all known methods of melting. The best results can be achieved by melting the alloy in the casting machine with high or medium frequency current. An oxy-acetylene torch or an electric arc can also be used.
Composition in percent:
- Ni - 27%.
- Cr - 22%.
- Fe - 42%.
- Si - 4%.
- Mo - 3%.
- Other - C, Mn, Cu.
Melting temperature range:
- 1333 - 1380 °C
temp. casting:
- 1420 °C
Packaging :
- 1 piece.
Hard convergent brush 80mm Vertex
Polishing brush, hard, convergent, diameter 80mm.
Packaging:
- 1 piece.
Armored shield diameter 64mm Keystone
Armored shield for a polisher.
- Diameter 64mm.
Packaging:
- 1 piece.
Smooth casting wax 0.5mm
BEGO smooth casting wax. It adheres strongly and burns without residue.
Characteristics:
- Dimensions 17.5x8cm.
- Thickness 0.5mm.
- Green color.
Packaging:
- 15pcs/pack
Habras Disc Pro, white 120 grit
Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.
Characteristics:
- assembled.
- shank diameter 2.35 mm.
- ø 25mm.
- Recommended operating speed 5000 rpm.
- 3 dials on one mandrel.
- Grit 120, medium.
- White color.
Packaging:
- 1 piece
Habras Disc Pro, blue, 400 grit
Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.
Characteristics:
- assembled.
- shank diameter 2.35 mm.
- ø 25mm.
- Recommended operating speed 5000 rpm.
- 3 dials on one mandrel.
- Grit 400, fine.
- Blue color.
Packaging:
- 1 piece
Takanishi brush size 8
Takanishi synthetic brush, size 8, ideal for applying porcelain.
Renfert catalog number 17140008
Characteristics:
- Tip diameter at the widest point: 4.5 mm.
- Tip length: 12 mm.
- Handle length: 43 mm.
- It remains flexible and stable for a long time.
Packaging:
- 1 piece.
Plaster IV Stodent cream - vanilla scent 3kg
Stodent IV is a super-hard type 4 dental plaster recommended for making working models of fixed frame dentures and flexible dentures, combined works, and post-implantation dentures.
Description:
- Cream color with a vanilla scent.
- Small expansion.
- Good liquidity.
Advantages:
- Very good detail reproduction.
- Smooth surface.
- High resistance to mechanical damage.
Technical data:
- Mixing proportions 20 ml / 100 g
- Mixing time (vacuum) 30 s
- Mixing time (manual) 60 – 90 s
- Setting time 8 -12 min.
- Compressive resistance (after 1h ) 45 ± 2 MPa [> 35 MPa]
- Linear expansion (after 2 hours ) max. 0.10% [< 0.15 %]
- Linear expansion after 24 hours < 0.18* %
Packaging:
- 3kg
Gypsum class IV. Stodent ash - strawberry scent 3kg
Stodent IV is a super-hard type 4 dental plaster recommended for making working models of fixed frame dentures and flexible dentures, combined works, and post-implantation dentures.
Description:
- Ash color with strawberry scent.
- Small expansion.
- Good liquidity.
Advantages:
- Very good detail reproduction.
- Smooth surface.
- High resistance to mechanical damage.
Technical data:
- Mixing proportions 20 ml / 100 g
- Mixing time (vacuum) 30 s
- Mixing time (manual) 60 – 90 s
- Setting time 8 -12 min.
- Compressive resistance (after 1h ) 45 ± 2 MPa [> 35 MPa]
- Linear expansion (after 2 hours ) max. 0.10% [< 0.15 %]
- Linear expansion after 24 hours < 0.18* %
Packaging:
- 3kg
Villacryl H Plus Monomer 400ml
Villacryl H Plus, liquid for hot polymerizing acrylic.
Packaging:
- 400ml.
Die Lube liquid 50g
Die lube pin insulator liquid. For isolating plaster, plastic and metal stumps from wax, porcelain and plastic.
Characteristics:
- It guarantees easy removal of caps shaped in wax.
- It is also used to smooth milled metal surfaces.
- Does not contain oil.
- Does not react with silicone.
Package:
- 50ml.
Diamond Micro DFS 50212
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.
Characteristics:
- Diamond Micro 15,000 - 30,000 rpm.
- Application - chrome - cobalt, palladium, porcelain.
Packaging:
- 1 piece.